Role of Co in formation of Ni-Ti clusters in maraging stainless steel

The effect of Co addition on the formation of Ni-Ti clusters in maraging stainless steel was studied by three dimensional atom probe (3DAP) and first-principles calculation. The cluster analysis based on the maximum separation approach showed an increase in size but a decrease in density of Ni-Ti clusters with increasing the Co content. The first-principles calculation indicated weaker Co-Ni (Co-Ti) interactions than Co-Ti (Fe-Ti) interactions, which should be the essential reason for the change of distribution characteristics of Ni-Ti clusters in bcc Fe caused by Co addition.     

Multicellular Tumor Spheroids (MCTS) as a 3D In Vitro Evaluation Tool of Nanoparticles

Multicellular tumor spheroid models (MCTS) are often coined as 3D in vitro models that can mimic the microenvironment of tissues. MCTS have gained increasing interest in the nano‐biotechnology field as they can provide easily accessible information on the performance of nanoparticles without using animal models. Considering that many countries have put restrictions on animals testing, which will only tighten in the future as seen by the recent developments in the Netherlands, 3D models will become an even more valuable tool. Here, an overview on MCTS is provided, focusing on their use in cancer research as most nanoparticles are tested in MCTS for treatment of primary tumors. Thereafter, various types of nanoparticles—from self‐assembled block copolymers to inorganic nanoparticles, are discussed. A range of physicochemical parameters including the size, shape, surface chemistry, ligands attachment, stability, and stiffness are found to influence nanoparticles in MCTS. Some of these studies are complemented by animal studies confirming that lessons from MCTS can in part predict the behaviour in vivo. In summary, MCTS are suitable models to gain additional information on nanoparticles. While not being able to replace in vivo studies, they can bridge the gap between traditional 2D in vitro studies and in vivo models.     

Effect of ZnO layer thickness upon optoelectrical properties of NiO/ ZnO heterojunction prepared at room temperature

In this work, p-NiO/n-ZnO heterostructures were successfully prepared at room temperature using RF sputtering technique. The influence of ZnO layer thickness on the performance of the heterojunction was investigated. The deposited ZnO layers have a hexagonal Wurtzite structure with preferable growth orientations along (002) and (103) for thinner films. Increasing the thickness results in more crystallographic orientation randomness. The current–voltage measurements of the realized heterojunctions showed a clear rectifying behavior. The measured ideality factor varies from 2.5 to 1.6 according to the thickness of ZnO layer. The series resistance of the device is enlarged with increasing ZnO thickness. The deduced parameters from the I–V characteristics suggest that 200 nm is the optimal thickness of the ZnO layer according to our experimental conditions. We attribute the relatively better performance of this thickness to achieving reasonable compensation between serial resistance and ideality factor. The best heterojunction was tested and successfully used as a UV detector.     

Improving weld formability by a novel dual-rotation bobbin tool friction stir welding

A novel dual-rotation bobbin tool friction stir welding (DBT-FSW) was developed, in which the upper shoulder (US) and lower shoulder (LS) have different rotational speeds. This process was tried to weld 3.2 mm thick aluminum-lithium alloy sheets. The metallographic analysis and torque measurement were carried out to characterize the weld formability. Experimental results show that compared to conventional bobbin tool friction stir welding, the DBT-FSW has an excellent process stability, and can produce the defect-free joints in a wider range of welding parameters. These can be attributed to the significant improvement of material flow caused by the formation of a staggered layer structure and the unbalanced force between the US and LS during the DBT-FSW process.     

Investigating the Dynamic Characteristics of High-Temperature SOI CMOS VLSIC Elements

The static and dynamic characteristics of SOI CMOS inverters are investigated in the temperature range from–60 to 250°С. The experimental dependences of the dynamic and static currents, as well as the delay of the logic gate (inverter), on temperature are obtained. Based on these characteristics, the operability of SOI CMOS logic gates at high temperatures is estimated.     

Altering the ratio of dietary palmitic,stearic, and oleic acids in diets with or without whole cottonseed affects nutrient digestibility,energy partitioning,and production responses of dairy cows

The objective of this study was to evaluate the effects of varying the ratio of dietary palmitic (C16:0), stearic (C18:0), and oleic (cis-9 C18:1) acids in basal diets containing soyhulls or whole cottonseed on nutrient digestibility, energy partitioning, and production response of lactating dairy cows. Twenty-four mid-lactation multiparous Holstein cows were used in a split-plot Latin square design. Cows were allocated to a main plot receiving either a basal diet with soyhulls (SH, n = 12) or a basal diet with whole cottonseed (CS, n = 12) that was fed throughout the experiment. Within each plot a 4 × 4 Latin square arrangement of treatments was used in 4 consecutive 21-d periods. Treatments were (1) control (CON; no supplemental fat), (2) high C16:0 supplement [PA; fatty acid (FA) supplement blend provided ～80% C16:0], (3) C16:0 and C18:0 supplement (PA+SA; FA supplement blend provided ～40% C16:0 + ～40% C18:0), and (4) C16:0 and cis-9 C18:1 supplement (PA+OA; FA supplement blend provided ～45% C16:0 + ～35% cis-9 C18:1). Interactions between basal diets and FA treatments were observed for dry matter intake (DMI) and milk yield. Among the SH diets, PA and PA+SA increased DMI compared with CON and PA+OA treatments, whereas in the CS diets PA+OA decreased DMI compared with CON. The PA, PA+SA, and PA+OA treatments increased milk yield compared with CON in the SH diets. The CS diets increased milk fat yield compared with the SH diets due to the greater yield of de novo and preformed milk FA. The PA treatment increased milk fat yield compared with CON, PA+SA, and PA+OA due to the greater yield of mixed-source (16-carbon) milk FA. The PA treatment increased 3.5% fat-corrected milk compared with CON and tended to increase it compared with PA+SA and PA+OA. The CS diets increased body weight (BW) change compared with the SH diets. Additionally, PA+OA tended to increase BW change compared with CON and PA and increased it in comparison with PA+SA. The PA and PA+OA treatments increased dry matter and neutral detergent fiber digestibility compared with PA+SA and tended to increase them compared with CON. The PA+SA treatment reduced 16-carbon, 18-carbon, and total FA digestibility compared with the other treatments. The CS diets increased energy partitioning toward body reserves compared with the SH diets. The PA treatment increased energy partitioning toward milk compared with CON and PA+OA and tended to increase it compared with PA+SA. In contrast, PA+OA increased energy partitioned to body reserves compared with PA and PA+SA and tended to increase it compared with CON. In conclusion, milk yield responses to different combinations of FA were affected by the addition of whole cottonseed in the diet. Among the combinations of C16:0, C18:0, and cis-9 C18:1 evaluated, fat supplements with more C16:0 increased energy output in milk, whereas fat supplements with more cis-9 C18:1 increased energy storage in BW. The combination of C16:0 and C18:0 reduced nutrient digestibility, which most likely explains the lower performance observed compared with other treatments.     

Defining University Anchor Institution Strategies: Comparing Theory to Practice

Since the 1990s, some urban universities have served as neighborhood anchors with an interest in revitalization. Current theory suggests anchors adopt ‘shared value’ approaches, leveraging resources for mutually beneficial improvement in the community. This study explores assumptions in contemporary anchor frameworks and uses a survey to examine how 22 U.S. universities approach their roles as anchor institutions. The study finds that the universities tend to prioritize place-based initiatives, while contemporary frameworks are more normative and highlight socioeconomic practices. Based on reported strategies, the author proposes an alternate typology that accounts for the ways universities most commonly describe anchor approaches, complementing contemporary theory.     

Local body cooling to improve sleep quality and thermal comfort in a hot environment

The effects of local body cooling on thermal comfort and sleep quality in a hot environment were investigated in an experiment with 16 male subjects. Sleep quality was evaluated subjectively, using questionnaires completed in the morning, and objectively, by analysis of electroencephalogram (EEG) signals that were continuously monitored during the sleeping period. Compared with no cooling, the largest improvement in thermal comfort and sleep quality was observed when the back and head (neck) were both cooled at a room temperature of 32°C. Back cooling alone also improved thermal comfort and sleep quality, although the effects were less than when cooling both back and head (neck). Mean sleep efficiency was improved from 84.6% in the no cooling condition to 95.3% and 92.8%, respectively, in these conditions, indicating good sleep quality. Head (neck) cooling alone slightly improved thermal comfort and subjective sleep quality and increased Stage N3 sleep, but did not otherwise improve sleep quality. The results show that local cooling applied to large body sections (back and head) could effectively maintain good sleep and improve thermal comfort in a hot environment.